
E1W Industrial Gland Kit (Peppers)
Description
Peppers.“E” type double compression glands provide a controlled IP seal on the cable inner sheath, an environmental seal on the outer sheath and a detachable armour specific clamping system for wire (W), braid/tape (X) armoured cables. The gland has been tested to IP66 and IP68 to 50 metres. The Integral Earth, “IE” version, allows the gland to be used with HV cables where the fault load is greater than 10.4kA and options are available for use with lead sheath, LSOH cables and extreme temperature applications. seal on the cable outer sheath and a detachable armour specific clamping system for wire (W), braid/tape (X) armoured cables. The “IE” version allows the gland to be used with HV cables where the fault load is greater than 10.4kA and options are available for use with LSOH cables and extreme temperature applications.
CW Glands can be rated to IP66, providing a suitable sealing washer or thread sealant is used at the gland interface.
Directions for Use
Indoor / Outdoor Applications.
Material
Aluminium.
Colour
Silver Metal.
Technical Data
Type | E1W |
---|---|
Design Specification | BS6121, EN 62444, IEC 62444 |
Gland Material | Aluminum, Brass or Stainless Steel |
Ingress Protection | IP66 & IP68 to 50m |
Finish | Aluminum, Brass or Stainless Steel |
Seal Material | Neoprene or Silicone |
Cable Type | Steel Wire Armour |
Armour Clamping | 3 Part |
Sealing Technique | Compression Type |
Sealing Area | Outer Sheath |
Size Chart
Gland Size | 16 | 20S | 20 | 25 | 32 | 40 | 50 | 63 | 75 |
---|---|---|---|---|---|---|---|---|---|
Peppers Part No. | E1W/B/16 | E1W/B/20S | E1W/B/20 | E1W/B/25 | E1W/B/32 | E1W/B/40 | E1W/B/50 | E1W/B/63 | E1W/B/75 |
No. per Pack | x2 | x2 | x2 | x2 | x1 | x1 | x1 | x1 | x1 |
Cable Range (mm) | 8.4 - 13.5 | 11.5 - 16.0 | 15.5 - 21.1 | 20.3 - 27.4 | 26.7 - 34.0 | 33.0 - 40.6 | 45.7 - 53.2 | 58.4 - 65.8 | 71.1 - 78.0 |
Entry Thread - D (mm) | M16 x 1.5 | M20 x 1.5 | M20 x 1.5 | M25 x 1.5 | M32 x 1.5 | M40 x 1.5 | M50 x 1.5 | M63 x 1.5 | M75 x 1.5 |
Entry Thread - E (mm) | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 19 | 19 |
Armour ⌀ (mm) | 0.9 | 0.15 - 1.25 | 0.15 - 1.25 | 1.25/1.6 | 1.6/2.0 | 1.6/2.0 | 2.0/2.5 | 2.0/2.5 | 2.5/3.0 |
Approx. Length from Shoulder - F (mm) | 58.0 | 58.0 | 58.0 | 58.0 | 65.0 | 72.0 | 73.0 | 76.0 | 82.0 |
Hexagon Across Flats - G (mm) | 24.0 | 24.0 | 30.0 | 37.6 | 46.0 |
55.0 |
65.0 |
80.0 |
90.0 |
Hexagon Across Corners - H (mm) |
26.5 |
26.5 | 33.0 | 41.4 |
50.6 |
60.5 | 71.5 | 88.0 | 99.0 |